How To Change Honeywell Alarm Code

Photo courtesy of Alarm System Store via YouTube

If your dwelling is equipped with a Honeywell Alarm system, information technology'south always protected against burglary, a criminal offence that happens at an boilerplate of every 13 seconds in the United States, according to the FBI.

Just having a security system has been shown to deter burglars as they look for an easier and safer target. Just even if you lot do get broken into the damage is mitigated to an extent. Without a security system in their homes, people lose an average of $5,343, while those whose homes are equipped with an alert system lose $3,266, co-ordinate to the Electronic Security Association. The $ii,000 divergence proves the essence of investing in a home security organization—to minimize loss from break-in.

So what does information technology mean to yous? Make the most out of your abode warning organization. Your alarm system can protect non just your home but also your family against the risk of fire and break-ins. Whether you're abode or away from home, your Honeywell Alarm system gives you peace of mind knowing you lot'll be quickly alerted of whatever potential security threat.

As a Honeywell alarm system possessor, one of the things you lot need to acquire is how to change its code, especially if the default master code has non been replaced yet. If y'all oasis't done and then, you lot'd meliorate change it before a burglar breaks in using your easy-to-guess default lawmaking.

What is a main code?

The master code is a four-digit security code programmed into your alarm system during its installation. You enter the code to silence alarms, turn the Chime mode on or off, arm or disarm the system, and perform other Honeywell Alert system functions.

This code is known only to you (if y'all had the system installed) or the previous owner of your home (if the arrangement is already installed when you lot moved in). You tin can besides assign different user codes, each with different authority levels and limitations, to other members of your household.

How to alter the master code of a Honeywell Alarm system

Just the primary user of the alarm system can alter the master code. Hither are the steps to practice it if yous know the default or existing lawmaking:

Enter your electric current main code. On Vista systems, the default lawmaking is 1234.

1. Press eight (the Lawmaking fundamental).
2. Press 02.
3. Enter a new four-digit master code.
4. Re-enter the new lawmaking. The keypad volition beep once to permit y'all know that the code has been changed.

How to reset the installer code

If you don't know the installer security code, you can however change it. Hither'south how to do information technology:

1. Unplug the transformer from the power source.
2. Disconnect the battery.
3. Plug the transformer back in.
4. Reconnect the battery.
5. Inside xxx seconds of turning the alarm system on, printing * and # at the same time. The screen will bear witness "Installer 20."
6. Enter *xx
7. Enter a new 4 digit installer code. The system should beep if it took information technology.
8. Press *99 to exit programming way.

How to verify that the code has been changed

Afterward you've entered a new installer code, make sure it works by testing it out. Information technology'south quick and easy to verify the new code. Here's how to exercise information technology:

1. Enter the new installer code followed past 800.
2. The screen should show Installer xx. This means that y'all are in programming manner.
3. Get out programming by entering *99.

Photo courtesy of Alarm System Shop via YouTube

How to assign, change or delete user codes

Equally the main user of your Honeywell Alarm system, you can assign secondary user codes to your spouse, children, parents, housekeeper and bodyguard; enabling them to operate certain functions on the alarm system.

1. Enter your master code.
2. Printing eight (the Code primal).
3. Enter a two-digit user number (from 03 to 33) for which a user code is to exist assigned, changed or deleted.
4. If you're assigning or changing a user code, enter a four-digit code that will be used by the person you assigned that code to. The keypad will then beep once.

If you lot're deleting a user code, do the outset two steps and stop. The keypad will then beep one time, which ways the lawmaking has been removed.

You tin can proceed adding or deleting user codes by repeating the process.

To test out the new user code, follow these steps:

1. Enter the user code.
2. Press 1 (OFF).
3. The keypad volition then ding once if the user code is programmed. Y'all won't hear anything if it is not programmed.

How to change user code authority levels

You can assign each of the secondary users an authority level, which defines the alarm system functions that a certain user can and cannot perform. For example, giving an authorization level one to a user means he or she tin just arm the warning organization. Convincing and other organization functions aren't allowed for this user.

Here's how to change the authority level for a user:

1. Enter your principal code.
2. Press eight (the CODE key).
3. Printing the user number whose authority level you lot desire to modify.
4. Printing #i.
5. Enter the number that corresponds to the potency level that you lot want to give that user.

To exam out the new authority level y'all should endeavor to do something that is unique to that authority level. For instance level 1 cannot disarm the system. To test it:

1. Enter the user lawmaking followed by 3 (STAY). The alert organization should arm.
2. Afterwards the alarm is fully armed, effort to disarm with the same lawmaking. User code followed past i (OFF). The system should not disarm.
3. Enter your master code.
4. Press 1 (OFF). The keypad will so beep once.

 Security code tips and precautions to call up

• To keep burglars or any unauthorized person from gaining access to your alarm system, don't create an obvious and easy-to-estimate lawmaking like 1234, 4321 or 1111.
• When you enter a code sequence, don't pause between key presses. Pressing each key should exist done inside 4 to five seconds. If that period elapses, your code won't be accepted, and you lot'll accept to start over again.
• If you hit a wrong key, just suspension for a few seconds. The warning organization will reset itself. And then start over.
• When you're done changing a code of your Honeywell security system, write it downward and keep it in a safe place. You'll need that code to make time to come changes to your home security organisation.

Here'southward a video tutorial by the Alarm System Store that will guide yous through the process of programming codes on a Honeywell Vista alert system.

Video courtesy of Alert Organisation Store via YouTube

Source: https://www.alarmsystemstore.com/blogs/diy/how-to-change-honeywell-alarm-system-code

Share this post